Plug the bigger USB drive into the PC that you are going to re-image.
Enter the BIOS Settings for your PC (1-4). Go to System Configuration > SATA Operations >Mark the bubble for AHCI
Reboot your PC and while it's booting up, keep pressing F12 so you enter the boot menu.
Once in the Boot menu, select the Sandisk USB drive as the boot partition.
Clonezilla will run. Select the first option:
Select English:
Select "Keep the default keyboard layout":
Select "Start Clonezilla":
Tap enter on "device-image":
Enter on "local_dev":
Press enter when prompted:
Press both Control + C:
In the next screen, select the drive where the new image is located, in your case should be a 128GB Sandisk drive, usually will be the last one in the list. (The one in this image won't match yours)
Press enter on "no-fsck":
Enter on "Restore Disk":
In this screen, you need to hover over the image file, in your case should be: "2022-06-09-16-img_PC1_2.3". Then, double TAB and enter over "DONE". (Again, you won't see all the options in the image below)
Select "Begginer mode":
Select "restoredisk" again:
One more time, select the image that you will be mounting, which should be: "2022-06-09-16-img_PC1_2.3" and press enter.
Now select the disk that you will be over writting, in your case should be a 512GB most likely:
Select "k0":
No, skip checking the image:
Choose:
Then wait for the process to be done, sometimes you will need to press Y or enter mid install.
Once the image has been mounted, please revert the BIOS settings that we changed in the first step: System Configuration > SATA Operation > Change it back to "Raid On"
Please contact support if you run into any issues, take photos of any issues and send it to our support number:
